pH Adjustment - pH Neutralization - Acid Wastes Neutralization Systems
Digital Analysis Corporation has been manufacturing pH neutralization systems for over 15 years. We manufacture pH Adjustment Systems ranging in size from 1 GPM to 1,000 GPM. All of our pH Adjustment systems are totally automated, skid mounted and totally fabricated in our facility before shipping.
Packaged / Skid Mounted pH Neutralization Systems
Digital Analysis manufactures three families of pH Adjustment Systems, pHASE, batchTREAT and labTREAT
|
|
pHASE pH Adjustment Systems. pHASE pH Adjustment systems are small, compact systems designed to handle a variety of highly acidic and highly alkaline waste streams. The pHASE family of pH adjustments systems is ideal for applications with flows under 40 gpm. |
 |
batchTREAT pH Adjustment Systems batchTREAT pH Adjustment systems are designed to handle a variety of highly acidic and highly alkaline waste streams. Any acidic or alkaline stream generated can be neutralized with a batchTREAT pH adjustment system. Ideal for flows from 40 to 1,000 GPM. |
 |
labTREAT pH Adjustment Systems labTREAT pH Adjustment systems are designed to handle the unique characteristics of laboratory and semi-conductor fab effluent waste streams. This system is ideal for high flows of relatively dilute acid and caustic wastes. |
 |
hydroTREAT pH Adjustment Systems hydroTREAT hydroTREAT pH Adjustment systems are designed specifically for the concrete and hydro-demolition industry. These systems are extremely rugged and are designed to be installed outdoors on construction sites. Using CO2 or mineral acid these systems are uniquely capable of handling the problems associated with concrete, both old and new. |
[You will note that we have used pH Neutralization / pH Adjustment
together. Actually the two terms are synonymous and we prefer to use pH
adjustment only. The term pH Neutralization implies adjusting the pH to a
neutral pH, which is a pH of 7.0. Since this is impractical to do in most cases,
and given the fact that all industrial discharges are provided range, such as
6.0 < pH < 9.0, we prefer to use the term pH Adjustment. Using pH
Adjustment as opposed to pH neutralization, we avoid the implication that the
discharge will always occur at a true neutral pH of 7.0]
Digital
Analysis Corporation
PO Box 95
716 Visions Drive
Skaneateles, NY 13152
315-685-0760
315-685-0766(fax)
For Product Information : Email : info@digital-analysis.com
For Service & Support :Email : support@digital-analysis.com
Shown here : 125 GPM "Optimized Duplex Batch" pH Adjustment System.
