AWN Systems by Digital Analysis Corp. labTREAT LT200 
0-200 GPM  
Wastewater Neutralization Systems 

labTREAT LT200 200 GPM Wastewater Neutralization System

Wastewater Neutralization System 200 GPM

labTREAT LT200 200 GPM Wastewater Neutralization System
(Illustrated here is a weatherproof system with UV and freeze protection)


System Performance Specifications: Influent Characteristic: Flow 0-300 GPM, 200 GPM average / 12,000 GPH max. Influent pH: 0 < pH < 14. Temperature 32-212F.

Effluent pH Range: typical 6.5 < pH < 8.5 (note: the effluent pH range is fully programmable through the operator interface).

Effluent Monitoring: As mandated by the local controlling authority and by most discharge permits continuous monitoring of effluent flow and pH is provided on a circular chart recorder, paperless recorder, or via a data logger. Additionally SCADA systems are available with automatic report generation.
The labTREAT family of Wastewater Neutralization Systems are small, compact, neutralization systems designed to neutralize waste water from any source.

The LT200 acid waste neutralization system displayed here is capable of treating wastewater flows up to 200 GPM continuous and 300 GPM intermittent. With the use of an influent equalization system, which is standard on all of our neutralization systems, periodic flows in excess of 350 GPM can be handled.

The labTREAT family of wastewater neutralization systems are well suited to neutralize effluent from any source including pharmaceutical manufacturing, CIP wastes, university laboratories, and science labs. These neutralization systems are often equipped with cooling loops to provide cooling of hot CIP wastes.

Utilities, Weight, Dimensions: Electrical: 480VAC, 3 phase, 60 hz, 20 amp. Disconnect not required (a disconnect is provided on our MCP).

Air: Less than 1 SCFH @ 80 psig.

Dimensions: 84" x 172" x 100"(H) - Not including the optional influent equalization system.

Weight: Approx. 7000 lbs. dry (not including shipping crate).
All of our waste water neutralization systems are supplied as complete "turnkey" packages. Prior to shipping all plumbing and electrical connections are complete and the wastewater system undergoes extensive burn in testing in our QC area including a wet / hydro test.

The Main Control Panel (MCP) is equipped with a main disconnect providing OSHA Lock Out / Tag Out (LOTO) and UL 508 compliance. Electrical requires a single point connection.

All of our neutralization systems utilize a fail safe valve on the discharge that immediately halts flow in the event of a discharge contravention, alarm, or a loss of power. This valve requires a small air supply. If air is not available the same function is provided in an all electric configuration.
Construction: Tanks: PP, PE, XLPE, FRP, and all stainless alloys.

Pipe, Valves, and Fittings: PVC, CPVC, PP, PE, PVDF, and all stainless alloys.

Main Control Panel: All of our pH systems are controlled by an programmable logic controller (PLC) typically Allen-Bradley. All panels are built to NEC, UL 508 and OSHA standards.

Weight: Approx. 7000 lbs. dry (not including shipping crate).

©2012 Copyright Digital Analysis Corporation. All rights reserved.