pH Neutralization Systems by Digital Analysis Corp. pHASE pH15 
0-15 GPM  
Packaged pH Adjustment Systems 

pHASE pH15 15 GPM pH Adjustment Systems

pHASE pH15 pH Neutralization and acid wastes neutralization system

Illustrated here is our pHASE pH15 pH Adjustment System with standard options

System Performance Specifications: Influent Characteristic: Flow 0-75 GPM, 15 GPM average / 900 GPH max. Influent pH: 0 < pH < 14. Temperature 32-140F. (High temp units available for temperatures up to 212F.

Effluent pH Range: typical 6.5 < pH < 8.5 (note: the effluent pH range is fully programmable through the operator interface).

Effluent Monitoring: As mandated by the local controlling authority and by most discharge permits continuous monitoring of effluent flow and pH is provided on a circular chart recorder, paperless recorder, or via a data logger. Additionally SCADA systems are available with automatic report generation.
The pHASE family of pH Adjustment Systems are small, compact, packaged pH neutralization systems designed to neutralize acidic and alkaline wastewater discharges from any source.

The pH system displayed here is a compact platform neutralization system designed to fit through a standard 36" man door and is capable of treating wastewater flows of up to 15 GPM continuous and 50 GPM intermittent. With the use of an influent equalization system, which is standard on all of our pH systems, periodic flows in excess of 75 GPM can be handled.

The pHASE family of pH systems are well suited to neutralize wastewater streams from any source including highly acidic or highly alkaline effluent streams.

Utilities, Weight, Dimensions: Electrical: 480VAC, 3 phase, 60 Hz, 15 amp. Disconnect not required (a disconnect is provided on our MCP).

Air: Less than 1 SCFH @ 80 psig.

Dimensions: 34" x 65" x 65"(H) - Not including the optional influent equalization system.

Weight: Approx. 550 lbs. dry (not including shipping crate).
All of our pH neutralization systems are supplied as complete "turnkey" packages. Prior to shipping all plumbing and electrical connections are complete and the pH system undergoes extensive burn in testing in our QC area including a wet / hydro test.

The Main Control Panel (MCP) is equipped with a main disconnect providing OSHA Lock Out / Tag Out (LOTO) and UL 508 compliance. Electrical requires a single point connection.

All of our pH adjustment systems utilize a fail safe valve on the discharge that immediately halts flow in the event of a discharge contravention, alarm or a loss of power. This valve requires a small air supply. If air is not available the same function is provided in an all electric configuration.
Construction: Tanks: PP, PE, XLPE, FRP, and all stainless alloys.

Pipe, Valves, and Fittings: PVC, CPVC, PP, PE, PVDF, and all stainless alloys.

Main Control Panel: All of our pH systems are controlled by an programmable logic controller (PLC) typically Allen-Bradley. All panels are built to NEC, UL 508 and OSHA standards.

Weight: Approx. 550 lbs. dry (not including shipping crate).

©2019 Copyright Digital Analysis Corporation. All rights reserved.